The activator is specially designed to accelerate the curing time of cyanoacrylate glue. jar of 20 ml Activator 21 is specially designed to accelerate the drying of cyanoacrylate glue. It has an application system: it can be used with a diffuser quickly and conveniently. This provides an almost instant and very strong bond even on the smallest parts without the need for too much pressure. It can be used in two ways: Before applying cyanoacrylate: wet the surface of the seam with the product and let it evaporate for 10-15 seconds. Then apply glue and quickly connect the two parts. The parts will come together almost immediately.
After applying the cyanoacrylate: after joining the parts, apply an activator to the cyanoacrylate. The joint fully cures in 2-3 seconds, creating a very strong bond. Be sure to seal the container tightly. Use the accelerator with appropriate protective equipment, including gloves, clothing, and eye protection, when working in a well-ventilated area. Keep away from heat. Keep out of the reach of children. Avoid contact with skin and eyes.