A-STAND Hotmetal Lacquer Blue
The A-Stand Hot Metal line was created to mimic the iridescent hues of burnt metal created by the high temperatures generated by aircraft jet engines. They can also be very useful for simulating this effect on exhaust pipes or any other metal component that is affected by heat and exhaust fumes. It must be remembered that if you apply a larger amount of the product, the effect will be more intense. Why use A-Stand?
The excellent flowability of A-Stand products makes it easy to spray without clogging the airbrush. They also provide a strong and durable finish once dry, allowing any other varnish, enamel or acrylic paint to be applied without any problems. In addition, modeling masking tape can be easily applied to the hard surface of A-Stand paint. A-Stand products dry to the touch in a short period of time of approximately 30 minutes, depending on the amount of paint applied, humidity and ambient temperature. Allow 1 hour to dry before safely applying other products, they will fully cure in 24 hours. The thinner used in these paints and varnishes, as in other lacquer products, is only suitable for airbrushing, not for painting with a brush.
