Application method:
1. Before use, mix well until a uniform consistency is obtained.
2. Apply paint to the cleaned and degreased surface using a brush or spray gun.
3. For dilution, use Mr.Color Leveling Thinner or Mr.Color Thinner in a ratio of 1:1-3 (paint:solvent).
4. After drying, the entire surface can be painted with transparent varnish, which will fix the applied layer of paint and prepare the model for applying decals or traces of use. Note:
if your chosen color is not available in matte or semi-matte and that is the finish you want, simply add to C-030 Flat Base, C-188 Flat Base Rough or C-189 Flat Base Smooth. paint.
Adding 5%-10% changes the type of coating by one degree. (gloss -> semi-matte -> matte)
The second option is to paint the entire model with colorless varnish and unify the surface and provide additional protection. (matte C-182 or GX-114, semi-matte C-181, gloss C-046 or GX-100) Advice:
To improve paint adhesion, obtain a smooth structure and durability of the painted surface, we recommend using one of the Mr.Surfacer primers and fillers in the form of a spray or airbrush. Keep tightly closed and away from direct sunlight.
